- UPDATE


  First announcement of 2019:                                                         02/19/19


3 Years ago on this very day was the last update made on our website.

Life and priorities forced a temporary focus outside CLR Motorsports.

Operating part time, kept the business going taking care of customers

as best as time permitted while maintaining and always delivering the very

best products and quality the "CLR" brand is known for.

                                         _________________


Today we are pleased to announce we are BACK and in FULL FORCE.

                                         _________________


We continue catching up with some customer work still left to be finished but

moving forward in full focus and operating to capacity.

Back at the start of this recess, a few projects unfortunately were left on the table.

Not for lack of interest, just lacking time to dedicate and finish.

- One that stands out most is the Rx-8 Hybrid / REW project.  Happy to announce

the project is back on schedule and will pick up were we left of very shortly.

Not much left to continue with the videos and finalize the built and car running.

Installation kits will follow shortly there after.

- Another very interesting project in final stages of development is a "Kit" wich

will prove to revolutionize the use of Rotary Engines in all forms of Motorsports

as well as economical everyday use on street cars.

Patent was filed and pending in status.  This "Kit" not only improoves specific performance, while at the same time reducing fuel consumption, but also improves exhaust emissions by a good margin. Dyno test results will be posted soon, with back to back test showing results using with vs. without.

I've been using and fine tuning the Kit in my personal daily beater (a 13b REW  Turbo Miata on e-85) for the better part of 2 yrs. Have more than doubled my fuel economy while making over 400 Hp, on 1/3 less boost from a bone stock 13b with

a Cummings Diesel single Turbo. Car is VIOLENT...  No other words to describe !

Stay tuned for videos and Dyno data.   For sale soon as patent number is issued.

- A couple more products that were under development, and now on schedule to 

finalize. First, based off our Supra V-160 gearbox adapter kit, a new "Bolt On Kit" for the Nissan 350/370 Z car gearbox. The CD009. This Gearbox is good for

1300 + Hp. Many of the Supra guys are using it now that the Getrag is no longer being made.  Our Kit "IS" a DIRECT BOLT-ON.  Not like the Collins adapter kit were you have to sever off the actual Bell Housing from the main case of the gearbox, then use a bunch of small hardware to bolt on a hard to get and no longer made Cosmo Automatic Bell Housing and side Starter.

Our "Kit" is a direct bolt on. No cutting. No sorting rare no longer made parts.

Our kit uses ANY Turbo flywheel and Clutch set up made for a Rotary. OEM or Aftermarket.  ANY.. . All that changes is the actual Clutch disc.  The driven disc splines must be Nissan. Everything else is Mazda.  The "Kit" even brings our own

Tilton style dedicated starter. Simple bolt on.  pictures will be up loaded shortly.


Remember, this is our very first update in 3 years.


Last I want to mention now our Dyno. 

We've been slowly purchasing everything brand new to update our Engine Dyno. Everything new except for the actual frame it self.  Doing this because we intend

to run every engine, every component, every part we develop through grueling paces and posting results before the very first unit is sold.

The idea is simple. What U see is what U get.  The proof is in the video for all to

see, judge, and compare.


Thank you for your time and stay tuned !

  


__________________



- UPDATE                                                                                        02/19/16     


As you all know, Pro Racing is our main line of business.

We provide engines to many race teams world wide. 

We've been receiving daily emails asking what is happening, and why there's been no further updates.

The start of the Racing season is upon us, and we have been very busy building engines and delivering contract work. 

We will continue again with the Rx-8 REW Hybrid project immediately after these commitments are all met, within the next 3 weeks.


We are very close to having a running the Demo car, and as with all prior stages of development, we will post videos as we test drive and tune the car.

Last :  We're finally getting around working out a prices of both the complete Kit, as well as individual components for the DYS crowd.    Thank you and stay tuned !




________​​​
-UPDATE:                                                                                       12/10/15


Big announcement:  Today we trial fitted a Borg Warner 8374 EFR on our

REN/REW Hybrid project, and we are ecstatic to confirm that this Jewel of a

Turbo, for those looking to build a seriously powered Rx-8 "does" fit with no

issues or obstructions what so ever,  when bolted to the Exhaust Manifold we

are now making.  ...  Pictures  uploaded on the Rx-8's project pg.

________ 


- UPDATE:                                                                                        12/04/15

Turbocharger installed and located with room to spare.  ...  Zero interference. 

More info on  Rx-8's pg.  under "Projects"  ...   Video coming shortly !

________


- UPDATE:                                                                                        11/25/15

 Major step forward with the Rx-8 / REW project !   The real RENESIS / REW Hybrid engine is already installed in Demo car. Everything has come together as planned. Fabrication of motor mount will be dealt with this coming week.  Once

the motor mount is completed and a jig built for production purposes, we will commence taking orders for REW engine bolt-in kits.  A new video (Part 9) has been uploaded.  Following, we'll continue with the Turbo fitment, plumbing, electrical, then after finish off the complete engine swap to a running Demo Rx-8.   A price list of individual components, and complete installation "Kit" will be published shortly soon as motor mount is done and ready for production.

* To view video, go to "Projects" pg, and click on Rx-8.    

__________



Wishing everyone a happy and safe Thanksgiving !

________      


* Some new changes !      
This
 
(News !) page. Bringing & posting weekly updates and latest developments. 

Additionally, new drop down links below "Projects" on the blue navigation bar

addressing specific topics of interest, now in process of uploading. Keep checking!

__________


​​- UPDATE :                                                                                          11/21/15    

The CLR Motorsports Store  is now open.  Expanding a new product line of  

proven upgrades on the product's link page.  Check back as new products are 

added !!!


__________


- UPDATE :                                                                                          11/20/15

Race season finally over,  A stellar ending to a break out year ! 


​Commencing 11/23/15, We'll continue with the RX-8 RENESIS/ REW Hybrid Project. Stay tuned for latest developments, and final videos of running Demo.

__________


​- UPDATE :                                                                                         1 1/03/15

We've made some changes  ....     

Added this new tab (News !) were we'll now bring you weekly updates !

Also a few more links and categories as drop down menus on the blue Nav bar


Check back often for updates.

__________


​- Rx-8 RENESIS/ REW Hybrid project :

Beginning November 23, 2015 our Rx-8/ REW Hybrid program will continue.

We'll pick up where we left off over a month ago.  Will continue posting developments and new videos as we move forward to completion !  

Go to PROJECTS on navigation bar,  look at drop down menu, Click on  Rx-8's, for latest developments.

13800  SW  142 Ave.  Suit #4    

Miami,  Fl.   33186     
      e-mail: CLRmotorsports@gmail.com     

     Phone : (305) 235 3696     

  ​​​ clR  motorsports

       Purpose built  /  World proven